The Millennia HV-3D is an 4-channel version of the very successful and popular HV-3C stereo preamp. The HV-3D combines multiple channels to minimize redundant mechanical and electrical parts. This is a tool you can build a career around: it will remain valuable and useful no matter how far your sonic explorations take you. Acquiring an HV-3D is a step off the upgrade treadmill, a step that will ultimately save you much more than your initial investment. For pristine audio capture on location and in the studio, Millennia's HV-3D is a great option!
Millennia HV-3D at a Glance:
- Open, Transparent Sound
- Perfect for Location Recording
- Pristine Audio Path
Millennia HV-3D Features:
-
- Unsurpassed ambience retrieval
- Transformerless design with matched hi-speed discrete transistor octet has 23 dB input headroom: no attenuator "pads"
- needed
- Uncolored timbral accuracy at all dynamic levels
- Entirely balanced audio path with precision components maintains signal integrity: THD under 5 ppm (.0005%)
- Effortless, vividly realistic, musical performance
- Laser-trimmed FET-based output stage has 32 dB headroom: drives 1000 foot (300m) cable runs with ease
- Standard 36-step gain controls (1.5 dB per step) are stereo-matched to .08 dB
- Ultra-clean toroid power supply
- Gold audio connectors and switches
- Mogami Neglex OFC audio wiring
- Silver Teflon power wiring
- Welded 16 gauge steel rack chassis
- Minimum Gain 8.5 dB
- Maximum Gain (1.5 dB per step, 36 steps) 65 dB (up to 75 dB on request)
- Frequency Response +0 / -3 dB sub 3 Hz to beyond 300 kHz
- Noise 60 dB Gain, 10 Hz - 30 kHz, Inputs common -133 dB EIN
- Total Harmonic Distortion + Noise 35 dB Gain, 10 Hz - 20 kHz bandwidth, +27 dBu Out < .001%, Typ. < .0005% (< 5 ppm)
- Intermodulation Distortion (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out < .0009%
- Phase Response 35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out < 2 degrees deviation
- Common Mode Rejection Ratio 35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M. > 65 dB, Typ > 85 dB
- Slew Rate 35 dB Gain, +27 dBu Out > 25 volts per microsecond
- Maximum Input Level 20 Hz - 40 kHz +23 dBu (no attenuator pads required)
- Maximum Output Level 20 Hz - 40 kHz +32 dBu
- Phantom Input Impedance 1 kHz 6,750 ohms
- Output Impedance 24.3 ohms (x2)
- Phantom Powering +48 V dc, +/- 2 V dc
- Power Requirements Selectable: 100-120, 200-240 V ac, 50/60 Hz
