HV-316
Sixteen Channel Remote Dante Network Mic Preamp
Overview
Unrestricted Capacity, Uncompromised Clarity
- 16 channels of pristine Millennia HV-3 microphone preamplifiers in a road-hardened 1U chassis (8 channel option)
- Effortless, vividly realistic, dynamically uniform HV-3 musical performance
- Dante network output standard -- analog output option.
- Both 12VDC (battery) and 80-264VAC worldwide powering
- Redundant power supply for fail-safe, glitch-free operation
- Paralleled next-generation AKM A-to-D conversion assuring >120dB dynamic range
- Designed for ultra-high-temperature continuous operation (65C / 150F)
- RF “pi filter” shielding provided on analog and digital feeds, destroys mobile interference
- Control up to 256 channels at once via conventional Ethernet.
- +34dBu input headroom for use in the most extreme audio environments
- Matched discrete-octet transistor gain topology, the classic Millennia HV-3 double-balanced circuit
- Ælogic Mac & Windows third-generation software offers total control for both HV-316 and HV-3R on the same network
- High-definition meters, grouping, linking, scene management, temperature monitoring
- Entirely balanced audio path with precision components maintains signal integrity: THD under 10 PPM (< .001%)
- Laser-trimmed FET-based output stage (analog output option) drives 1000-foot (300m) cable runs with ease
- All channels matched to 0.08 dB
- Advanced power supply rated for 650,000 hours MTBF operation
- Aluminum 16-gauge rack chassis, ultra-lightweight, just 10 pounds
- Billet aluminum laser etched front-panel
- Lovingly hand-built and quality-assured in Northern California USA
Specifications
|
Minimum Gain |
1 dB |
|
Maximum Gain (1 dB per step) |
64 dB |
|
Attenuator Pad |
-20 dB |
|
Frequency Response (analog output option) (+0 / -3 dB) |
sub 8 Hz to beyond 200 kHz (analog) |
|
Noise (60 dBu Gain, 10 Hz - 30 kHz, Inputs common) |
-130 dB EIN |
|
Total Harmonic Distortion + Noise (35 dB Gain) |
< .005%, (<.001% Typ.) |
|
Intermodulation Distortion (50 Hz & 7 kHz), 35 dB Gain, 0 dBFS |
< .0009% |
|
Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, 0 dBFS |
< 2 degrees deviation |
|
Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.) |
> 65 dB, Typ > 85 dB |
|
Slew Rate (35 dB Gain) |
> 25 Volts per microsecond |
|
Maximum Input Level (20 Hz - 40 kHz) |
+34 dBu (pad in) |
|
Maximum Output Level (20 Hz - 40 kHz) |
+22 dBu (analog output option) |
|
Phantom Input Impedance (1 kHz) |
6,750 ohms |
|
Output Impedance |
24.3 Ohms (analog output option) |
|
Phantom Powering |
+48 V dc, +/- 2 V dc, 15 ma per channel in reserve |
|
Power Consumption |
100 watts maximum |
|
Dimensions/Shipping Weight |
19" W x 1.75" H x 16" D, 10 lbs. (16ch), 9 lbs (8ch) |
|
|
|
|
DANTE |
|
|
Physical Layer |
Ethernet |
|
Connectors |
Dual RJ-45 (Primary / Secondary) |
|
Cable Quality |
CAT-5e or better |
|
Transmission Speed |
1Gbps |
|
Supported Sample Rates |
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
|
Minimum Dante Latency |
250 µS |
|
Supported Modes |
Redundant / Switched |
|
AES67 Support |
Planned (Dante embedded) |
