BiG
The Stereo Image Bigger Maker for series 500.
500 series double-slot module for stereo stage processing.
BiG enlarges the stereo image in a new manner and opens up new creative ways of sound shaping.
Intuitive with just three controls.
The On/Bypass switch activates (On)
or deactivates (Bypass) the module.
This allows you to quickly switch between
processed and unprocessed signal.
The signal LEDs (Sig) indicate whether an audio signal is present at the input of the respective channel. (With a level higher than -20 dBu)
With the Range control, the frequency Range which should be processed can be selected.
With the Stage control, the frequency range previously selected with the Range control can be moved backwards or forwards on the stereo stage.
The huge BIGNESS control adjusts the intensity of the STEREO IMAGE SHAPING.
The BASS/Off switch can be used to activate (BASS) or deactivate (Off) an additional bass boost following the
BIGNESS section.
The bass boost is performed by a passive filter implemented in a similar circuit to the one used in the AirBass function of
the SPL IRON Mastering Compressor.
BIGNESS section.
The bass boost is performed by a passive filter implemented in a similar circuit to the one used in the AirBass function of
the SPL IRON Mastering Compressor.
Input & Output; balanced
Maximum input & output gain
21 dBu
Input impedance
20 kΩ
Output impedance
150 Ω
Common mode rejection
> 82 dB
Frequency range (-3 dB)
10 Hz – 100kHz
THD & N (0 dBu, 10 Hz – 22 kHz)
0.03 %
Noise (A-weighted)
-92.3 dBu
Dynamic range
113 dB
