null Skip to main content

Bricasti design M21 Dual mono converter

Bricasti Design

AED63,849.00 (Inc. VAT 5%)
AED60,808.57 (Ex. VAT 5%)
(No reviews yet) Write a Review
SKU:
BD-002
Weight:
5.00 KGS
Shipping:
Free Shipping
Adding to cart… The item has been added

Part of the Platinum Series, the M21 is a natural evolution of digital-to-analog conversion systems, previously available in devices such as the M1 Special Edition and M12 Dual Mono Source Controller. The advanced architecture of the M21 provides 3 independent signal paths: 24-bit delta sigma, 20-bit ladder DAC, and 1-bit DSD playback for DSD data.

The M21 converter can also function as a fully independent audio streaming module. Simply connect it to your network using a standard Ethernet cable and once it detects the device as a DNLA, enjoy uninterrupted data transmission even over long distances, without signal loss or degradation.

The M21 allows precise control of the fully analog Gain parameter, necessary when determining the signal amplification level or direct DSD playback. The device is also equipped with an analog attenuator operating in the "true hard-wire bypass" standard. Setting this parameter to "0 dB" allows the M21 to be used in direct connection with an external preamplifier. The converter provides all the necessary digital outputs, and its two sections have been designed to easily work with virtually any system. The fully differential circuit provides an output signal with lower resistance, which works perfectly in combination with amplifiers of similar design, e.g. Bricasti M28 or M15.

Finally, it is worth adding that the M21 converter, like other Bricasti devices, is manufactured in the USA according to principles proven over the years.

TECHNICAL SPECIFICATIONS:

  • Digital Inputs XLR: AES/EBU 24bit Single Wire, BNC: SPDIF, RCA: SPDIF
  • Optical inputs: Toslink 44.1- 96k, USB 2
  • AES, S/PDIF, AUX in sampling range: 44.1 kHz, to 192 kHz
  • USB Sampling Range: 44.1 kHz to 384 kHz, DSD 64fs 128fs as DoP
  • Ethernet Sampling Range: 44.1 kHz to 384 kHz, DSD 128
  • Jitter: 8psec @ 48k / 6psec @ 96k
  • Balanced analog outputs: XLR balanced (pin 2 hot)
  • Impedance :  40 ohms
  • Output: @ full scale +16.5 dbm (5.2V RMS)
  • Output level: 90db in one decibel steps
  • D/A conversion: PCM 24 bit delta sigma 8x oversampling, DSD direct 1 bit, 384Khz ladder dac
  • Frequency Response @44.1k: 10hz- 20kHz +0dB, -.2dB
  • Dynamic Range: >120dB A-Weighted
  • THD+N @ 1k: .0008% @ 0dbfs / .0004% @-30dbfs
  • Unbalanced analog outputs: RCA
  • Impedance: 40 ohms
  • Output level: Full scale at front panel +6 dbm (1.2V RMS)
  • D/A conversion: PCM 24 bit delta sigma 8x oversampling, DSD direct 1 bit, 384Khz ladder dac
  • Frequency Response @ 44.1k: 10 hz- 20 kHz -.2 dB
  • Dynamic Range: >120dB A-Weighted
  • THD+N @ 1k: .0008% @ 0dbfs / .0004% @-30dbfs PCM sigma delta<

Additional information:

  • EMC - compliant with: EN 55103-1, EN 55103-2, FCC part 15 and Class B 
  • RoHS - compliant with: EU RoHS Directive 2002/95/EC
  • Safety - certified to: IEC 60065, EN 55103-2
  • Device operating temperature: 32 F to 105 F (0 C to 40 C)
  • Device storage temperature: -22 F to 167 F (-30 C to 70 C)
  • Voltages: -100, 120, 220, 240 VAC, 50 Hz – 60 Hz factory set
  • Trigger out: TRS connector for 5V external trigger.
  • Power consumption: 28 W (6W in standby mode)
  • Finish: anodized aluminum
  • Dimensions: 44cm x 31cm x 18cm
  • Weight: 6.8 kg
  • Warranty on parts and workmanship: 2 years (non-extendable)